About Mason Broussard

This author has not yet filled in any details.
So far Mason Broussard has created 21 blog entries.

Union City Oklahoma- Purchase of this property from past owner to allow GVT to perform the expansions needed.

July 2018, Union City Oklahoma- Purchase of this property from past owner to allow GVT to perform the expansions needed. Tank plant to install new 50 x 100 coating facility to lower VOC emissions to EPA and local regulations, allow more tanks and vessels to be coated internally as well as externally with high performance coatings the industry demands. This addition will also help deliveries stay in line during inclement weather , Cold temp, High Winds, etc. Air permits applied for, building in b [...]

Union City Oklahoma- Purchase of this property from past owner to allow GVT to perform the expansions needed. 2018-09-06T18:23:33+00:00

Longview, TX- Conversion of machinery and production process in our Kodak API Tank plant to accommodate more tank production at faster run rates with same high standard API 12F quality.

June 2018, Longview, TX- Conversion of machinery and production process in our Kodak API Tank plant to accommodate more tank production at faster run rates with same high standard API 12F quality. This change in our process also increases safety to help prevent accidents and/or injury to the valuable employees of this company. [...]

Longview, TX- Conversion of machinery and production process in our Kodak API Tank plant to accommodate more tank production at faster run rates with same high standard API 12F quality. 2018-09-06T18:23:46+00:00

Olla LA – Reopening of this facility to bring in tank production from Longview,Tx Callahan facility due to conversion of Callahan to an ASME Code vessel shop.

June 2018, Olla LA - Reopening of this facility to bring in tank production from Longview,Tx Callahan facility due to conversion of Callahan to an ASME Code vessel shop. Brought in all employees and equipment necessary to get tank production out as needed. [...]

Olla LA – Reopening of this facility to bring in tank production from Longview,Tx Callahan facility due to conversion of Callahan to an ASME Code vessel shop. 2018-09-19T15:37:22+00:00

Longview, TX- Conversion of our Callahan API Tank plant to an ASME Code Pressure Vessel and custom skid package manufacturing facility!

June 2018, Longview, TX- Conversion of our Callahan API Tank plant to an ASME Code Pressure Vessel and custom skid package manufacturing facility! This additional 25,000 sq ft shop space and work force will allow us to achieve a reduction in lead time for ASME Code equipment by 4- 5 weeks in most cases. ASME Code stamp to be in place by Mid October as per State of Texas. [...]

Longview, TX- Conversion of our Callahan API Tank plant to an ASME Code Pressure Vessel and custom skid package manufacturing facility! 2018-09-06T18:24:40+00:00

Longview,Tx- Opening of Gum Springs machine shop.

September 2017, Longview,Tx- Opening of Gum Springs machine shop. Installed new 20' x 40' Plasma burn table and welding machinery at this 12,500sq. ft. facility to be a centralized location to cut and fabricate API storage tank tops and bottoms, vessel internals, fire tubes, etc. This location serves and ships needed parts to our Longview, TX Kodak plant, Union City, OK Plant, Olla, LA Plant, and Laurel, MS Plant. [...]

Longview,Tx- Opening of Gum Springs machine shop. 2018-09-06T18:24:50+00:00

New Iberia LA- Expands operation with an additional 15,000 sq ft shop dedicated to constructing Modular Skid and Interconnect Piping.

September 2017, New Iberia LA- Expands operation with an additional 15,000 sq ft shop dedicated to constructing Modular Skid and Interconnect Piping. This expansion also provides a 50% increase in the existing ASME Code Vessel facility which reduces lead time and allowing Global to secure an additional share of the Pressure Vessel market. [...]

New Iberia LA- Expands operation with an additional 15,000 sq ft shop dedicated to constructing Modular Skid and Interconnect Piping. 2018-09-06T18:25:00+00:00

Global Vessel & Tank solves common industry challenge!

Global Vessel & Tank solves common industry challenge! The solution is the Enviro-Flange™ for Direct Fired Process Equipment. No more Firetube failures when you specify Global’s Patent Pending Oval Raised Face Fire-Tube Flange to ANSI B16.5 /AMSE requirements. The use of the Enviro-Flange™ eliminates rubber gasket failures and allows for higher MAWP options for Heater Treaters and Heated Separators. Contact Global Vessel & Tank for improved safety and reduced downtime on your production [...]

Global Vessel & Tank solves common industry challenge! 2018-06-25T18:19:11+00:00

Food, Fun & Friends! That’s what was served up at Global Vessel & Tank’s Grand Opening of its Union City Oklahoma manufacturing facility.

Food, Fun & Friends! That’s what was served up at Global Vessel & Tank’s Grand Opening of its Union City Oklahoma manufacturing facility. Global has expanded its manufacturing footprint into Central Oklahoma Region with its newest facility in Union City, OK. The facility will serve as a point of manufacturing of API 12-F Storage Tanks, Heater Treaters and Separators, which are commonly used in the prolific formations of Oklahoma. Contact Randy Richardson for more information about Global Vessel [...]

Food, Fun & Friends! That’s what was served up at Global Vessel & Tank’s Grand Opening of its Union City Oklahoma manufacturing facility. 2018-06-25T18:23:09+00:00

Global Vessel & Tank announces expansion with additional 12,000 square feet of Tank and Vessel Manufacturing on 10 acres right in the heart of Oklahoma.

Global Vessel & Tank announces expansion with additional 12,000 square feet of Tank and Vessel Manufacturing on 10 acres right in the heart of Oklahoma. The Union City Oklahoma facility has state-of- the-art tools and machinery, Indoor Coating Booth, and a best in class workforce to continue Global’s tradition of quality and output of product second to none in the industry. [...]

Global Vessel & Tank announces expansion with additional 12,000 square feet of Tank and Vessel Manufacturing on 10 acres right in the heart of Oklahoma. 2018-06-25T18:25:40+00:00

Global Vessel & Tank awarded Deepwater Production Test Separator Package with operator in the Gulf of Mexico.

Global Vessel & Tank awarded Deepwater Production Test Separator Package with operator in the Gulf of Mexico. The 60 x 10 Horizontal 3 Phase Separator Project is designed and built to API RP 14-C Offshore Specification with full Instrumentation included. Global Vessel & Tank’s New Iberia, LA facility has delivered numerous Offshore Separation units as well as Glycol Dehydration Skids for several operators in the Gulf of Mexico over the past 8 years. [...]

Global Vessel & Tank awarded Deepwater Production Test Separator Package with operator in the Gulf of Mexico. 2018-06-25T18:51:14+00:00
Load More Posts